Home » Sản phẩm » Máy bơm chữa cháy

E-mail
Tohatsu V20D2STohatsu V75FS

Tohatsu V46BS
Hình phóng to


Tohatsu V46BS

Giá: Call

Liên hệ để biết thêm chi tiết

Features & Benefits

  • Sửa chữa, bảo trì định kỳ máy bơm chữa cháy
  • Đại tu sau 5-10 năm hoạt động dự phòng
  • Buôn bán máy cũ tân trang
  • Máy mới nhập khẩu 100%

1. Lightweight and compact
Models V46BS and V66CS have a dry weight of only approximately 87 kg (192 lbs) amd 86 kg (190 lbs) respectively, and they are of compact design. With this weight and size the fire pumps can be easily carried by two firemen and positioned close to the fire even in narrow and rugged places. These are essential features of a portable fire pump to facilitate rapid fire fighting.
The engine is designed and produced exclusively for the fire pumps, its high performance, light weight and compact size enhances the engine's reliability and durability.
Most of the engine and pump component parts are made of anti-corrosive Aluminum-alloy to lighten the weight and prolong the working life.

2. Low engine noise
Large silencers are fitted to both the intake and exhaust ports to reduce engine noise.
A specially designed water cooled muffler is fitted to reduce engine noise.

3. Highpump performance
In the portable fire pump class, this series of pump has a recognized high performance rating.

Pressure V46BS V66CSE
At 4kg/cm2 1,450L/min 1,700L/min
At 6kg/cm2 1,250L/min 1,550L/min.
At 8kg/cm2 1,000L/min 1,300L/min
At 10kg/cm2 600L/min 950L/min
(Suction height: at 3m)

The installation of an inducer on the pump shaft facilitates higher suction lift performance.

4. Immediate priming(Attained by a simple procedure)
The high performance vacuum pump installed in this series of the fire pump has the following priming rates.
3.0 sec. at Hs = 1m(Using 6m suction hose)
3.5 sec. at Hs = 3m(Using 6m suction hose)
5.0 sec. at Hs = 6m(Using 8m suction hose)
The rotary vane type vacuum pump has a high pumping performance with a maximum draw height of 9 meters(29.5 feet).

5. Unique auto choke carburetor
Because of Tohatsu's unique auto choke carburetor on this model, the engine will start easier in all seasonal temperature condition. There is no choke knob because no choke adjustment requires.

6. Fuel draining feature
After the fuel remaining in the carburetor float chamber will deteri-orate very quickly leading to hard starting, and possible engine damage. Model V66CS and V46BS is equipped with a float chamber drain valve to provide easy removal of unused fuel in the carburetor. Fuel should be drained from the float chamber after each use to ensure consistent fast starting in future emergencies.

7. Engine overheat protection sensor (V66CS)
Overheat protection is provided on this model to safeguard the engine from cooling water loss, and to protect the pump without supplying water. This device will stop the engine automatically when the operating temperature reaches 80°C. A reset switch is provided to override the sensor after it stops the engine. This gives control to the operator in emergency situations.

8. Reliable electric starter and back-up recoil starter
An electric starter and back-up automatic recoil starter are installed to guarantee starting the engine under any condition.

9. Stainless steel fuel tank
A stainless steel fuel tank prevents fuel contamination resulting from tank corrosion, which in turn ensures longer engine life.

10. 180° rotating discharge port
The discharge port can be rotated freely through 180° allowing the direction of the delivery hose to be changed without replacing the pump unit.

Notes:
(1)Hose connection: Throughout the world there are different types of hose connection. We can supply some kinds of the adators. Please cunsult your local dealer with regard to changing the thread at both the suction and discharge ports to fit the local adaptors.
(2) Twin deliver model: It is also possible to supply a bifurcating adapter to fit at the discharge port, but depends on the type of connection.

OK Monitor:
The OK Monitor check the following five points

* Vacuum Pump Oil Level Indication Lamp
This warning lamp lights up when the oil level in the vacuum pump oil chamber reaches a dangerous low level. The lamp lights up when 2/3rds of the oil has been used-and the oil must be tilled immediately.

* Fuel Level Alarm Lamp
The warning lamp lights up when the level of fuel in the tank is low (2/3rds EMPTY). Fuel should be added as nec-cessary. The tank should be kept fully topped up with fresh fuel.

* Engine Overheat Protection Sensor Device
This device stops the engine automati-cally when the engine has excessively heated caused by lack of cooling water. The engine will top and the lamp will light when the overheat sensor works.

* Pump Drain Cock Open Alarm Lamp
This warning lamp lights up when the drain cock of the main pump is open. After the pump has delivered water, a small amount of water will remain in the pump chamber. This should be removed by opening the cock. Close the cock after drainage has been completed. It would be difficult to prime the pump with this cock open, so check it frequently and also before starting the engine.

* Battery Specific Gravity Fluid (Electrolyte) Level Alarm Lamp
When this warning lamp lights up, it indi-cates that the battery requires attention. The electrolyte level may be low, in which case distilled water should be added to the correct mark. Should the lamp still indicate poor performance, then the battery requires charging.

Product Infomation

NHẬP KHẨU CHÍNH HÃNG TỪ NHẬT BẢN

Xuất xứ: Nhật Bản

Bảo hành:

Máy tân trang: 06 tháng

Specifications

Engine: V66CS V46BS
Type: 2-stroke, 2-cylinder, water cooled gasoline
Model: 2WT72CA 2WT72BA
Bore & Stroke & No. of Cylinder: 72 x 68mm (2.83 x 2.68 inch) x 2
Total Piston Displacement: 554cc (33.8 cu.in.)
Authorised Output: 40PS/29.4kW 32PS/23.6kW
Maximum Output: 50PS/36.8kW 45PS/33.1kW
Fuel Tank Capacity: Approx.11L(2.91 US gals.)
Fuel Consumption: Approx.15L(3.96 US Gals.) Approx.14L(3.70 US gals.)
Starting System: Starter motor, Automatic recoil and Pull rope
Choke System Auto choke system
Lubrication: Fuel mixture (Gasoline 30:Engine oil 1)
Ignition: Flywheel Magneto (CDI system)
Lighting Floodlight Projector: 12V - 35W
Lighting Pilot Lamp: 12V - 3.4W
Battery: 12V - 21AH/5h
Pump:
Type: Single-suction single-stage, high pressure turbine pump
Discharge Port Coupling: JIS-B-9912 dimensions of screwed type coupling for fire hose 21/2"(0"82.5, 5 threads per inch, angle of threads 55deg)
Suction Port Coupling: JIS-B-9912 dimensions of screwed type couping for fire hose 3"(95", 4 threads per inch, angle of threads55deg)
Priming: Rotary-vane vacuum pump
Pump Performance:
(Suction height : 3 m)
at  4kg/cm2
at  6kg/cm2
at  8kg/cm2
at 10kg/cm2


1,700L(449 US gals.)/min
1,550L(409 US gals.)/min
1,300L(343 US gals.)/min
950L(251 US gals.)/min


1,450L(383 US gals.)/min
1,250L(330 US gals.)/min
1,000L(264 US gals.)/min
600L(159 US gals.)/min
Dimensions and Weight
Overall Length
Overall Width
Overall Height

697mm (27.44 inch)
605mm (23.82 inch)
754mm(29.68 inch)

685mm(26.85 inch)
605mm(23.82 inch)
754mm(29.68 inch)
Weight 87kg(192 lbs) 86kg(190 lbs)







Bạn có thể cũng quan tâm tới một hoặc vài sản phẩm này


Sản phẩm cùng nhóm


MÁY BƠM DIESEL

MÁY BƠM DIESEL


MÁY BƠM XĂNG TOHATSU

MÁY BƠM XĂNG TOHATSU


Đã cập nhật mới nhất: Thứ năm, 07 Tháng mười một 2024 23:34

Hỗ trợ báo giá

KINH DOANH:

THIẾT BỊ PCCC

click đi đến zalo

 

Mr. Vương:

090 135 6996(click để gọi)

Mail báo giá: sales@pccchochiminh.com

 

Nhận:

 

THIẾT BỊ PCCC HỒ CHÍ MINH

Công ty Thiết bị Nam Phương

ĐC: 93/12 Vạn Kiếp, P.3, Q. Bình Thạnh, Tp. HCM

Hotline0345 345 114

CN 1: 658 Đỗ Xuân Hợp, P. Phước Bình, Q.9, Tp.HCM

Xưởng gia công cơ khí: 119D Đông Minh, P. Đông Hòa, Tp. Dĩ An, Bình Dương

Giấy phép kinh doanh số 0312280899

Giấy đủ điều kiện kinh doanh số 57/GXN-PCCC


Nhà cung cấp

logo_Hochiki
logo_Eschbach
logo_Gesecurity
logo_tyco
logo_Shinyi
logo_Paragon
logo_Tohatsu
logo_Kentom
logo_Horing